OUR RESI-BLAST, THE CELL AND STRUCTURE MEDIUM

OUR RESI-BLAST, THE CELL AND STRUCTURE MEDIUM That's it. With resi-BLAST you can create unique cells, structures and color gradients on your artwork. The tension between resi-BLAST and resin creates incredible effects on your art. It can. Resi-BLAST can be used in many different ways. The advantage is that resi-BLAST does not connect to the resin, but displaces it. This allows you to create individual and unique cells, structures and color gradients that give your artwork something fascinating. That's what it's for. Resi-BLAST is specially designed for use with resin. Displacing the resin can create different cells depending on the amount. There are no limits to your imagination when it comes to Colours. Particularities. With resi-BLAST you can create special effects in your resin art. The effects appear immediately after the drops and you can follow the process of the cells live. In addition, the cells can be subsequently edited and changed. The effects are not only visible but can also be felt haptically. Measuring, mixing and processing resi-BLAST Mix with resin 1.) Resin and hardener of MASTERCAST 1-2-1 are mixed by volume 1:1. Place the two components in a suitable mixing cup. 2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and edges of the mixing cup. 3.) Your mix is ??ready and you now have 25-30 minutes to process the resin. Now you can color the resin and add resi-BLAST. 4.) After you have dropped the resi-BLAST into your color mixture, you will immediately see that something has changed in the mixing cup. 5.) You have prepared your painting surface beforehand, which means: it is dusted, degreased and lying flat on your work surface. Now pour the color mixture with resi-BLAST onto the painting surface. 6.) You can influence the resulting effects by blow-drying the cells with a heat gun. To do this, you have to try to enlarge or change the cells in circular movements over your cells. Dripping on the artwork 1.) Resin and hardener of MASTERCAST 1-2-1 are mixed by volume 1:1. Place the two components in a suitable mixing cup. 2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and edges of the mixing cup. 3.) Your mix is ??ready and you now have 25-30 minutes to process the resin. After that it becomes too thick and begins to harden. 4.) You have prepared your painting surface beforehand, which means: it has been dusted off, degreased and is lying flat on your work surface. Now pour your color mixture onto the painting ground. 5.) In order to achieve the most spectacular results possible, you should apply at least two different colors to your painting surface. 6.) Drop the resi-BLAST on one color only to create a monochrome effect. The point in time at which you apply the resi-BLAST is also important. The ideal time is about 5 minutes after casting, as the resin then offers the right consistency. The wrong time will cause an oily layer to form on your resin surface. 7.) You can influence the resulting effects by blow-drying the cells with a heat gun. To do this, you have to try to enlarge or change the cells in circular movements over your cells.