RESIN - AN INDISPENSABLE PART OF THE ART WORLD
(AND THE ETTER ART SHOP)

THE PRODUCT MASTERCAST 1-2-1 That's it. MASTERCAST 1-2-1 is an ASTM certified two-component resin for easy and safe application. Create stunning and glossy works of art with MASTERCAST 1-2-1. It can. MASTERCAST 1-2-1 becomes a hard and glassy varnish when its two individual components are mixed. It also offers the best possible protection against yellowing. This is ensured by so-called UV stabilizers: Our products contain a UV absorber and HALS (Hindered Amine Light Stabilizer) That's what it's for. MASTERCAST 1-2-1 has a medium viscosity, so it is a slightly thicker resin. It is therefore ideal for fluid painting. Add coloring or any other additive to create extraordinary effects and cell structures. Create individual optical effects, for example by working with a heat gun. This works great on canvas, wood, glass, metal, furniture, mosaics, encaustic paintings, drawings, paintings, photos, paper collages, prints and more. Particularities. Due to its thicker consistency, MASTERCAST 1-2-1 is also particularly suitable for beginners. This resin does not flow away when you work and you can approach the medium that is new to you. Measure, mix and apply MASTERCAST 1-2-1 1.) Resin and hardener of MASTERCAST 1-2-1 are mixed by volume 1:1. Place the two components in a suitable mixing cup. 2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and edges of the mixing cup. 3.) Your mix is ??ready and you now have 25-30 minutes to process the resin. After that it becomes too thick and begins to harden. 4.) You have prepared your painting surface beforehand, which means: it has been dusted off, degreased and is lying flat on your work surface. Now pour the synthetic resin mixture onto the painting surface. Resin is self-leveling and will spread itself over a smooth, flat surface. but you are welcome to help with a spatula. 5.) MASTERCAST 1-2-1 is a high quality product that produces little, if any, bubbles. If bubbles appear, simply remove them with the heat of a Bunsen burner or a heat gun. To do this, move about 10 cm away from the resin surface in swinging movements. 6.) Protect your work from dust or other foreign objects by working in an environment that is as dust-free as possible. Cover it when it's done. 7.) The best way to clean the hardened surface is with a damp Cloth. You should pay attention to this: Although our resins are formulated with the most advanced and safest epoxy chemistry available, you should handle all epoxy resins responsibly and be proactive about your safety: • Always wear nitrile gloves. • When sanding cured resin, wear a dust mask, and better yet, wear safety goggles. • It is advisable to work in a well-ventilated area and to wear a Respirator. • Avoid skin contact (if resin gets on skin, wash with plenty of soap and water). • DO NOT eat, drink or smoke while working. • If eyes get dirty, wash with plenty of water for 15 minutes and seek medical attention immediately. • Adding inks/varnishes/mica powder/glitter to epoxy changes its properties and may reduce its non-toxicity. If you are using alcohol ink, DO NOT use a flame to remove bubbles as alcohol is flammable. You can find more technical information about the Eli-Chem-Resin MASTERCAST 1-2-1 in our overview table. MASTERCAST 1-2-1 is available in the following container sizes: 400 g, 2 kg, 4 kg, 10 kg

THE PRODUCT ULTRACAST XT That's it. Are you talking about large areas or formats? Surfaces that need to be particularly heat-resistant? Then work with ULTRACAST XT. We developed this resin system specifically for such needs. ULTRACAST XT is an ASTM certified two-component resin and is of very high quality. You can use ULTRACAST XT easily and safely and create impressive, high-gloss works. It can. ULTRACAST XT becomes a hard and glassy varnish when its two individual components are mixed. It also offers the best possible protection against yellowing. So-called UV stabilizers ensure this: Our products contain a UV absorber and HALS (Hindered Amine Light Stabilizer). That's what it's for. Think big! ULTRACAST XT is the right resin for you when it comes to large formats and surfaces. These include, for example, large-format painting surfaces, tables, counters, kitchen worktops or floors. ULTRACAST XT is ideal for finishing, in mixed media applications or for pouring. This resin system is also a good choice for surfaces that need to be heat-resistant. Particularities. In order for ULTRACAST XT to do justice to large areas, it has a particularly long processing time: you have up to 80 minutes to work and design. It is also heat resistant up to 80-90°C. Measure, mix and apply ULTRACAST XT 1. ULTRACAST XT resin and hardener are mixed by volume 2:1. Place the two components in a suitable mixing cup. 2. Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and edges of the mixing cup. 3. Your mix is ??ready and you now have 60-80 minutes to process the resin. After that it becomes too thick and begins to harden. 4. You have previously prepared your painting surface, which means: it is dusted, degreased and lying flat on your work surface. Now pour the synthetic resin mixture onto the painting surface. Resin is self-leveling and will spread itself over a smooth, flat surface. but you are welcome to help with a spatula. 5. ULTRACAST XT is a high quality product that produces little, if any, blisters. If bubbles appear, simply remove them with the heat of a Bunsen burner or a heat gun. To do this, move about 10 cm away from the resin surface in swinging movements. 6. Protect your work from dust or other foreign objects by working in an environment that is as dust-free as possible. Cover it when it's done. 7. The hardened surface is best cleaned with a damp Cloth. You should pay attention to this: Although our resins are formulated with the most advanced and safest epoxy chemistry available, you should handle all epoxy resins responsibly and be proactive about your safety: • Always wear nitrile gloves. • When sanding cured resin, wear a dust mask, and better yet, wear safety goggles. • It is advisable to work in a well-ventilated area and to wear a Respirator. • Avoid skin contact (if resin gets on skin, wash with plenty of soap and water). • DO NOT eat, drink or smoke while working. • If eyes get dirty, wash with plenty of water for 15 minutes and seek medical attention immediately. • Adding inks/varnishes/mica powder/glitter to epoxy changes its properties and may reduce its non-toxicity. If using alcohol inks, DO NOT use a flame to remove bubbles as alcohol is flammable. You can find more technical information about the Eli-Chem-Resin ULTRCAST XT in our overview table. ULTRACAST XT is available in the following sizes: 1.5 kg, 3 kg, 7.5 kg, 15 kg

TOPCOAT 2-1: the scratch-resistant epoxy resin for clear coatings - and much more TOPCOAT 2-1 is a synthetic resin consisting of two components: resin and hardener. After mixing the two components, you get a crystal-clear and extremely hard coating. It not only offers you protection against scratches, but also against yellowing. TOPCOAT 2-1 contains very good UV protection: absorbers and HALS (Hindered Amine Light Stabilisers).   Possible applications of TOPCOAT 2-1 synthetic resin TOPCOAT 2-1 is perfect for sealing surfaces. How does it work? Simply coat your artwork or another surface such as tables or counters with a layer of TOPCOAT 2-1 - and you're done. You can also use TOPCOAT 2-1 for other artistic applications. Of course, it can be quickly dyed to your desired colours using suitable colourants. We know artists, who use it to mould the most amazing coasters. Trays can be designed just as easily. With TOPCOAT 2-1, you can achieve a layer up to 25 mm high in a single step. Sufficiently high even for embedding flat objects. Special features of the TOPCOAT 2-1 resin TOPCOAT 2-1 has a low viscosity and is therefore very fluid. This makes coating with this synthetic resin easy. This epoxy resin also allows you to work almost bubble-free. Important: The resin is purple in liquid form due to the UV protection it contains. However, it hardens to a clear colour, we promise you that.   Application TOPCOAT 2-1 for a clear coating Step 1: Pour the resin and hardener into a suitable mixing cup. Mix TOPCOAT 2-1 by volume 2:1. Step 2: Then mix the two components thoroughly. Stir slowly and carefully with a plastic spatula. Pay attention to the base and rim of your mixing cup. You will be done after 3 to 5 minutes, unless you are mixing a huge amount. In this case, of course, stir for longer. Step 3: You now have a generous 60-80 minutes to process TOPCOAT 2-1. The resin will then start to harden. Step 4: If you have not yet prepared your work or object for the coating, you should do so now. It must be dedusted and degreased. It should also lie flat so that you can achieve an even coating. TOPCOAT 2-1 is self-levelling. Feel free to use a spatula if you want to spread everything a little faster. Step 5: If small bubbles do get into the surface, you can easily remove them with a hot air dryer or crème brûlée burner. To do this, swivel your tool about ten centimetres above the resin surface. Step 6: Now allow your coating to harden. Protect your object from dust or other foreign objects. Step 7: You can easily wipe the hardened surface with a damp cloth to clean it later. Have you already worked with a different epoxy resin on your work and want to apply a final coat of TOPCOAT 2-1? Please wait until the previous surface has hardened, i.e. 24 hours. Then it is ready for the final coat.   You should pay attention to this! Although our resins are formulated with the most modern and safest epoxy chemicals available, you should handle all epoxy resins responsibly and proactively ensure your safety: -Always wear nitrile gloves -When sanding cured resin, wear a dust mask and, even better, safety goggles -It is advisable to work in a well-ventilated area and wear a respirator mask -Avoid skin contact (if resin gets on the skin, wash with plenty of soap and water) -DO NOT eat, drink or smoke while working -If eyes are contaminated, wash with plenty of water for 15 minutes and seek medical attention immediately Adding inks/paints/mica powder/glitter to epoxy resin will alter its properties and may reduce its non-toxicity. If you use alcohol ink, DO NOT use a flame to remove bubbles as alcohol is flammable Further technical information on Eli-Chem-Resin TOPCOAT 2-1 can be found in our overview table. TOPCOAT 2-1 is available in the following container sizes: 1.5 kg, 3 kg, 7.5 kg, 15 kg

THE PRODUCT TOTALCAST That's it. TOTALCAST is a crystal clear, ASTM certified, two part resin. It is well suited for embellishing artworks and embedding objects and is among the highest quality resins on the international market. Working with TOTALCAST means: easy and safe application - impressive and high-gloss results. It can. TOTALCAST becomes a hard and glassy varnish when its two individual components are mixed together. It also offers the best possible protection against yellowing. This is ensured by so-called UV stabilizers: Our products contain a UV absorber and HALS (Hindered Amine Light Stabilizer), which provide maximum protection against yellowing. That's what it's for. TOTALCAST is particularly useful when you want to coat or embed (cast) something. This is due to its unique clarity and transparency. Use this high-quality resin as a coating, sealing and finishing for your artwork. For example on photos, prints, canvas, wood, MDF, glass, Plexiglas, concrete or metal. TOTALCAST is also the right resin for you for making jewelry and embedding objects. Particularities. TOTALCAST has a rather short processing time of up to 20 minutes. This has the advantage that your objects dry faster and are therefore less susceptible to dust or other external influences. Measure, mix and process TOTALCAST 1.) TOTALCAST resin and hardener are mixed by volume 1:1. Place the two components in a suitable mixing cup. 2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and edges of the mixing cup. 3.) Your mix is ??ready and you now have 15-20 minutes to process the resin. After that it becomes too thick and begins to harden. 4.) You have prepared your painting surface beforehand, which means: it has been dusted off, degreased and is lying flat on your work surface. Coating: Now pour the synthetic resin mixture onto the painting surface. Resin is self-leveling and will spread itself over a smooth, flat surface. but you are welcome to help with a spatula. Pour in: your painting surface is prepared and also has a frame so that the resin does not flow away. Pour resin onto the canvas; a layer structure is possible in several layers. Depending on the volume, note the maximum layer thickness of 1-2 cm. As soon as the first layer is bone dry (after about 4-5 hours) you can pour the next layer. The individual casting steps are not visible from above. A slight optical thermocline can only be seen in the planes when viewed from the side. 5.) TOTALCAST is a high-quality product that produces only small bubbles, if any. If bubbles appear, simply remove them with the heat of a Bunsen burner or a heat gun. To do this, move about 10 cm away from the resin surface in swinging movements. 6.) Protect your work from dust or other foreign objects by working in an environment that is as dust-free as possible. Cover it when it's done. 7.) The best way to clean the hardened surface is with a damp Cloth. You should pay attention to this: Although our resins are formulated with the most advanced and safest epoxy chemistry available, you should handle all epoxy resins responsibly and be proactive about your safety: • Always wear nitrile gloves. • When sanding cured resin, wear a dust mask, and better yet, wear safety goggles. • It is advisable to work in a well-ventilated area and to wear a Respirator. • Avoid skin contact (if resin gets on skin, wash with plenty of soap and water). • DO NOT eat, drink or smoke while working. • If eyes get dirty, wash with plenty of water for 15 minutes and seek medical attention immediately. • Adding inks/varnishes/mica powder/glitter to epoxy changes its properties and may reduce its non-toxicity. If using alcohol inks, DO NOT use a flame to remove bubbles as alcohol is flammable. You can find more technical information about the Eli-Chem-Resin TOTALCAST in our overview table. TOTALCAST is available in the following sizes: 500 g, 2 kg, 4 kg, 10 kg  

THE PRODUCT DEEPCAST That's it. You can also work well with synthetic resin beyond classic painting grounds: Cast large casting heights, high volumes, unusual shapes and 3D molds. DEEPCAST ??is a two part resin and one of the highest quality products on the market. The application is easy and safe. With DEEPCAST ??you will create impressive objects. It can. When mixing its two individual components, DEEPCAST ??becomes a hard and glass-like cast. It also offers the best possible protection against yellowing. So-called UV stabilizers ensure this: Our products contain a UV absorber and HALS (Hindered Amine Light Stabilizer). That's what it's for. We developed DEEPCAST ??specifically to fill cavities. This makes it perfect for making a river table, for example. Pour up to twelve liters in one go with DEEPCAST ??and achieve a layer height of 5 cm and more. Particularities. DEEPCAST ??has a long curing time, which means it will not shrink as it cures - an important consideration for crafts and artists. The reason for this is the low heat development. With DEEPCAST, the exothermic reaction when resin and hardener are combined is significantly weaker than with other resin systems. Measuring, mixing and processing DEEPCAST 1. DEEPCAST ??resin and hardener are mixed by volume 2:1. Place the two components in a mixing bowl. 2. Stir the measured amount in the mixing bowl. Use a stir stick for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and the edges of the mixing vessel. 3. Your mix is ??ready and you now have 25 hours* to process the resin. After that it becomes too thick and begins to harden. 4. You have previously prepared your form accordingly. Now pour the resin mixture into the mold. 5. Protect your work from dust or other foreign objects by working in an environment that is as dust-free as possible. Cover it when it's done. You should pay attention to this: Although our resins are formulated with the most advanced and safest epoxy chemistry available, you should handle all epoxy resins responsibly and be proactive about your safety: •Always wear nitrile gloves. •When sanding cured resin, wear a dust mask, and better yet, wear safety goggles. •It is advisable to work in a well-ventilated room. •Avoid skin contact (if resin gets on skin, wash with plenty of soap and water). •DO NOT eat, drink or smoke while working. •If eyes get dirty, wash with plenty of water for 15 minutes and seek medical attention immediately. •Adding inks/varnishes/mica powder/glitter to epoxy changes its properties and may reduce its non-toxicity. If using alcohol inks, DO NOT use a flame to remove bubbles as alcohol is flammable. DEEPCAST ??does not contain a drying accelerator. Therefore, both the processing and the curing time for this resin are significantly longer than for others. You can find more technical information about the Eli-Chem-Resin DEEPCAST ??in our overview table. DEEPCAST ??is available in the following sizes: 1.5 l, 3 l, 7.5 l, 37.5 l

RAPIDO Dein ideales Resin für: außergewöhnliche Resinkunst und schnelle Resinkunst Extrem kurze Aushärtezeit     Highlights Epoxidharz RAPIDO • Außergewöhnliche Resinkunst • Schnelle Resinkunst • Cup Art • Frozen Waterfall • Creating Connections • Adding Elements • RAPIDO muss eingefärbt werden • Extrem kurze Aushärtezeit   Entdecke das Polymerharz RAPIDO Die Schnelligkeit macht den Unterschied: RAPIDO Resin ist ein innovatives Polymerharz, das dir neue kreative Möglichkeiten bietet. Es härtet in Sekunden aus, sodass du außergewöhnliche dreidimensionale Effekte und schwebende Kunstwerke erschaffen kannst. RAPIDO Resin eignet sich perfekt für verschiedene Anwendungen, wie zum Beispiel: • RAPIDO Cup Art:  Gestalte schwebende Becher für beeindruckende Kunstwerke • Frozen Waterfall: Kreiere mit leicht bläulich eingefärbtem RAPIDO Resin deinen eigenen Wasserfall • Creating Connections: Gieße eine kleine Tasse „auf“ eine Etagere für kreative Verbindungen • Adding Elements: Bringe direkt nach dem Gießen kleine Objekte wie Steinchen, Holzstücke oder glänzende Akzente wie Spiegel, Glitter und Halbedelsteine auf das Resin Mach deine Kunst noch lebendiger und außergewöhnlicher. Mit RAPIDO Resin geht das. Probier es aus!   Anwendung RAPIDO Beispiel: Cup Art (mit Objekt) Einfärben, Abmessen und Anmischen 1. Gib als Erstes das Harz in einen Mischbecher, und färbe es mit geeigneten Pigmenten ein. Trage beim Arbeiten mit Resin Nitrilhandschuhe. 2. Füge nach dem Einfärben den Härter im Verhältnis 1:1 nach Gewicht zu. 3. Mische die abgemessene Menge im Mischbecher mit einem Kunststoffspatel. Rühre langsam und sorgfältig um, auch an Boden und Rändern des Mischbechers. Du wirst feststellen, dass dein Mischbecher sich erwärmt. Das ist normal, die chemische Reaktion setzt bei RAPIDO sehr schnell ein. Nach ungefähr zwei Minuten ist deine Mischung schon fertig. Anwenden 4. Fülle deine Mischung in den Becher, der in deinem Kunstwerk verewigt sein soll. 5. Gieße RAPIDO sehr langsam – also erst einmal in einem dünnen Strahl – aus dem warmen Becher. Es wird innerhalb weniger Sekunden dickflüssig, geliert schon beim Gießen. Wichtig: Du brauchst eine stabile Resin-Verbindung von Becher zu Objekt – passe also gegebenenfalls deine Gießgeschwindigkeit an. Achte außerdem von Beginn an auf Position und Höhe deines Bechers. Du gießt ihn schließlich über dem Objekt fest. Punkt 4 und 5 dauern insgesamt nur ungefähr 45 bis 60 Sekunden. RAPIDO … Der Name hält, was er verspricht. Abschluss Nach dem Festgießen darfst du den Becher noch für fünf bis zehn Minuten an Ort und Stelle halten, damit alles bleibt, wo es ist. Dann bist du bereit für den nächsten Becher … und so weiter. Übrigens: Dein Resin brennt nicht, auch wenn dein Becher am Ende richtig heiß wird. Das ist üblich bei RAPIDO.   Technische Daten Resin RAPIDO Niedrige Viskosität: 500 mPa.s Mischverhältnis Harz zu Härter: 1:0,85 nach Volumen, 1:1 nach Gewicht Frei von: VOC, BPA, Nonylphenolen Verarbeitungszeit: 3 Minuten Aushärtungszeit: 24 Stunden Berührungstrocken: nach 15 Minuten UV-Schutz: UV-Absorber + HALS Entspricht: ASTM D4236 Weitere technische Informationen zum Epoxidharz findest du in unserer Etter-Art-Broschüre.   Darauf solltest du beim Arbeiten mit Kunstharzen achten Unsere Epoxidharze bestehen aus den modernsten und sichersten Epoxidchemikalien. Ein verantwortungsvoller und sicherer Umgang mit Kunstharzen bedeutet: • Trage Nitrilhandschuhe und eine Atemschutzmaske. • Arbeite in einem Raum, den du gut lüften kannst. • Vermeide Hautkontakt (einzelne Komponenten oder angemischtes Resin auf Haut mit viel Wasser und Seife abwaschen). • Wenn Harz, Härter oder Resin ins Auge gelangt ist: circa 15 Minuten mit kaltem Wasser ausspülen und dann sofort ärztlich untersuchen lassen). • Während der Arbeit nicht trinken, essen oder rauchen. • Zugegebene Materialien verändern dein Resin möglicherweise: dazu zählen Tinten, Lacke, Glimmerpulver und Glitter. Mit diesen Materialien ist dein Resin nicht mehr ungiftig. • Bei Verwendung von Alkoholtinten: Verwende keine Flamme, um Bläschen zu eliminieren. Alkohol ist entzündlich.   Wofür ist RAPIDO dein ideales Resin? Was hast du als Nächstes damit vor?

BIOCAST: bio-certified epoxy resin (according to ASTM D6866-22, method B) Organic - without compromises: This two-component resin is just as easy and safe to use as all other Etter Art resin systems. It contains just as good UV protection as all other Etter Art resin systems (absorbers and HALS, Hindered Amine Light Stabilisers). And it hardens to a hard and glass-like varnish - like all our resin systems ... In addition, BIOCAST is of course perfectly self-deaerating, so that bubbles are hardly or not at all an issue. Possible applications of BIOCAST synthetic resin How do you want to use resin in your art, do you already have an idea? BIOCAST is at your side in almost every case, if you like. Resin artworks. Mixed media artworks. Pouring. Fluid painting. Coating ... Clear or coloured. Full-surface or partial. With up to 10 mm layer height in one pour. BIOCAST is a real resin accomplice for you!   Possible applications of BIOCAST synthetic resin How do you want to use resin in your art, do you already have an idea? BIOCAST is at your side in almost every case, if you like. Resin artworks. Mixed media artworks. Pouring. Fluid painting. Coating ... Clear or coloured. Full-surface or partial. With up to 10 mm layer height in one pour. BIOCAST is a real resin accomplice for you! Special features of the BIOCAST resin The name says it all: BIOCAST is an epoxy resin that contains biomass. We even tell you exactly how much of it: • BIOCAST resin contains 33 % biomass. • The hardener of BIOCAST contains 8 % biomass. • In the mixture, this results in a biomass content of 23 % due to the mixing ratio. BIOCAST therefore consists of almost a quarter biomass. Quite a lot, isn't it? What we find important: The biomass comes from the paper industry, where it is a by-product of paper production and processing. It is therefore not an edible product. We would not support that. The viscosity of BIOCAST is also special. It is so high that you can work very precisely with this synthetic resin. This is great for working on picture edges, for example. You determine what the resin does - at least to a certain extent. And: with BIOCAST, you can create unique cells on the surface of your artwork. Maybe even cells like you've never seen before.   A How-To Guide on BIOCAST Step 1: Mix BIOCAST by volume 1:1 or by weight 1:0.9 by placing both components in a suitable mixing cup. Step 2: Then mix the resin and hardener. As with other resin systems, stir slowly and carefully, including the base and rim of the mixing cup. This will give you your finished resin mixture after 3 to 5 minutes. Step 3: If you want to work with coloured resin, now is the right time for colourants. One or more, as appropriate for your work. Step 4: You can work with your clear or coloured mixture for 35 to 40 minutes before it becomes too thick and starts to harden. Step 5: Prepare your painting surface or object for the resin by degreasing and dusting it. You can also do this before mixing. Your painting surface or object should also be level so that the resin can spread evenly. BIOCAST is self-levelling, but you can also spread it with a spatula. Step 6: Simply remove any bubbles from the surface. To do this, swirl a hot air dryer or crème brûlée burner over the resin surface at a distance of around ten centimetres. Step 7: Then allow the resin to harden. Make sure that dust or other foreign bodies do not adhere to the surface. Step 8: Enjoy your work of art. And if necessary: clean. This is easy with a damp cloth. Organic? Of Course! With all the advantages of an excellent epoxy resin? Absolutely! And it's even certified. Take a look at the CIRAM assessment. Our information is as transparent for you as clear resin.   Please be aware! Although our resins are formulated with the most modern and safest epoxy chemicals available, you should handle all epoxy resins responsibly and proactively ensure your safety: • Always wear nitrile gloves • When sanding cured resin, wear a dust mask and, even better, safety goggles • It is advisable to work in a well-ventilated area and wear a respirator mask • Avoid skin contact (if resin gets on the skin, wash with plenty of soap and water) • DO NOT eat, drink or smoke while working • If eyes are contaminated, wash with plenty of water for 15 minutes and seek medical attention immediately Adding inks/paints/mica powder/glitter to epoxy resin will alter its properties and may reduce its non-toxicity. If you use alcohol ink, DO NOT use a flame to remove bubbles as alcohol is flammable Further technical information on Eli-Chem-Resin BIOCAST can be found in our overview table. BIOCAST is available in the following container sizes: 500g, 1kg, 2kg, 4kg, 10kg

OUR RESIN STARTER SETS FOR PRACTICE AND TRYING OUT That's them. You've never worked with resin before? That's why we created our Etter Art Resin Starter Sets for you. Get to know and try out resin. The sets always contain both components of the respective resin, two to three pearlescent pigment powders, resi-TINT MAX pigment powder, a small mixing cup, a spatula for application, ten small spatulas and nitrile gloves. Particularities. • Designed to be beginner friendly. • Contains all products needed for working with resin. • Different sizes for different Projects  

THE PRODUCT HI-BUILD That's it. HI-BUILD Resin is a high-viscosity, two-component resin that offers the benefits of 3D height. It can. HI-BUILD becomes a hard and glassy varnish when its two individual components are mixed together. It also offers the best possible protection against yellowing. This is ensured by so-called UV stabilizers: Our products contain a UV absorber and HALS (Hindered Amine Light Stabilizer) That's what it's for. HI-BUILD has a high viscosity and is a very thick resin. That is why it is perfect for blob art, dot art, geode art and the so-called doming. With HI-BUILD you can create custom effects that add three-dimensional depth to your work. Particularities. Due to its thick and sticky consistency, HI-BUILD is one of the most manageable resins on the market. No sagging, slipping or flowing, HI-BUILD stays right where you put it. It comes in a creamy color by default and can be colored with various pigments. Use a suitable resin pigment, such as Resi-TINT, Resi-TINT MAX or an equivalent of our products. Measure, mix and apply HI-BUILD 1.) Resin and hardener from HI-BUILD are mixed by volume 1:1. Place the two components in a suitable mixing cup. 2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and edges of the mixing cup. 3.) Your mix is ??now complete and you now have 25-30 minutes to process the resin. After that, it becomes even thicker and begins to harden. 4.) You have previously prepared your painting surface, which means: it has been dusted off, degreased and is lying flat on your work surface. Now you can color the resin with a resin pigment of your choice and drip onto your surface using a plastic spatula. You can use this process to create three-dimensional shapes. 5.) HI-BUILD is a high-quality product that produces only small bubbles, if any. If bubbles appear, simply remove them with the heat of a Bunsen burner or a heat gun. To do this, walk about 30 cm above your surface in swinging movements. Don't get closer than 30cm to your artwork or there is a risk of ripples and pits forming in the resin finish. 6.) Protect your work from dust or other foreign objects by working in an environment that is as dust-free as possible. Cover it when it's done. 7.) The best way to clean the hardened surface is with a damp Cloth. You should pay attention to this: Although our resins are formulated with the most advanced and safest epoxy chemistry available, you should handle all epoxy resins responsibly and be proactive about your safety: • Always wear nitrile gloves. • When sanding cured resin, wear a dust mask, and better yet, wear safety goggles. • It is advisable to work in a well-ventilated area and to wear a Respirator. • Avoid skin contact (if resin gets on skin, wash with plenty of soap and water). • DO NOT eat, drink or smoke while working. • If eyes get dirty, wash with plenty of water for 15 minutes and seek medical attention immediately. • Adding inks/varnishes/mica powder/glitter to epoxy changes its properties and may reduce its non-toxicity. If you are using alcohol ink, DO NOT use a flame to remove bubbles as alcohol is flammable. You can find more technical information about the Eli-Chem-Resin HI-BUILD in our overview table. HI-BUILD Resin is available in 400g, 2kg, 4kg and 10kg sizes.

SUPERCAST Dein ideales Basis-Resin: Optimal für Einsteiger Perfekt für Pouring und Schmuckherstellung     Highlights Epoxidharz SUPERCAST • Basis-Resin: ideal für Resin-Einsteiger oder zum Experimentieren mit Resin als Kunstmedium • Pouring • Fluid Painting • Gestalten von Schmuck und Deko-Objekten • Klarer Überzug   Entdecke das Kunstharz SUPERCAST Die Zugänglichkeit macht den Unterschied: SUPERCAST ist der optimale Basis-Resin für Einsteiger. Dank seines günstigen Preises ist dieses Resin perfekt, um Resin als Kunstmedium auszuprobieren. Es überzeugt durch eine ausgezeichnete UV-Beständigkeit, Klarheit und Transparenz und eignet sich so ideal zum Schutz von nahezu jedem kreativen Projekt. Besonders gut geeignet ist SUPERCAST für flache Gussformen, wie Schmuckstücke, Blumen oder Briefbeschwerer.   Anwendung  SUPERCAST Beispiel: Pouring Abmessen 1. Gib Harz und Härter 1:1 nach Volumen (oder 1:0,9 nach Gewicht) in einen Mischbecher. Trage beim Arbeiten mit Resin Nitrilhandschuhe. Anmischen 2. Mische die abgemessene Menge im Mischbecher mit einem Kunststoffspatel. Rühre langsam und sorgfältig um, auch an Boden und Rändern des Mischbechers. Nach drei bis fünf Minuten ist deine Mischung fertig. Du hast jetzt 30–45 Minuten Zeit, um dein Resin zu verarbeiten. Danach beginnt es auszuhärten. 3. Zum Einfärben verteilst du das Resin auf einzelne Mischbecher, je einen pro Farbe. Mische deine ausgewählten Farbmittel mit einem Mischstäbchen ein. Anwenden 4. Deinen Malgrund hast du bereits vorbereitet: Er ist entstaubt, entfettet und eben auf deiner Arbeitsfläche platziert. 5. Gieße dein eingefärbtes Resin auf den Malgrund. Deine Bildkomposition bestimmt den Platz und die benötigte Menge je Farbe. Resin verteilt sich von allein auf einer glatten und ebenen Oberfläche, du kannst aber mit einem Spachtel nachhelfen. Und so erzeugst du spannende Effekte: Mit einem Heißluftföhn schiebst du unterschiedlich eingefärbtes Resin ineinander. 6. SUPERCAST bildet kaum Blasen. Diese kannst du mit der Hitze eines Bunsenbrenners oder Heißluftföhns entfernen. Gehe dazu mit schwenkenden Bewegungen in circa zehn cm Abstand über die Resin-Oberfläche. 7. Schütze dein Kunstwerk vor Staub oder anderen Fremdkörpern. Arbeite dafür in einer möglichst staubfreien Umgebung. Und decke dein Werk ab, wenn du fertig bist.   Technische Daten Resin SUPERCAST Mittlere Viskosität: 2.600 mPa.s Mischverhältnis Harz zu Härter: 1:1 nach Volumen, 1:0,9 nach Gewicht Frei von: VOC, BPA, Nonylphenolen Verarbeitungszeit: 30–45 Minuten Aushärtungszeit: 3–5 Tage Berührungstrocken: nach 4–6 Stunden UV-Schutz: UV-Absorber + HALS Entspricht: ASTM D4236   Darauf solltest du beim Arbeiten mit Kunstharzen achten Unsere Epoxidharze bestehen aus den modernsten und sichersten Epoxidchemikalien. Ein verantwortungsvoller und sicherer Umgang mit Kunstharzen bedeutet: • Trage Nitrilhandschuhe und eine Atemschutzmaske. • Arbeite in einem Raum, den du gut lüften kannst. • Vermeide Hautkontakt (einzelne Komponenten oder angemischtes Resin auf Haut mit viel Wasser und Seife abwaschen). • Wenn Harz, Härter oder Resin ins Auge gelangt ist: circa 15 Minuten mit kaltem Wasser ausspülen und dann sofort ärztlich untersuchen lassen). • Während der Arbeit nicht trinken, essen oder rauchen. • Zugegebene Materialien verändern dein Resin möglicherweise: dazu zählen Tinten, Lacke, Glimmerpulver und Glitter. Mit diesen Materialien ist dein Resin nicht mehr ungiftig. • Bei Verwendung von Alkoholtinten: Verwende keine Flamme, um Bläschen zu eliminieren. Alkohol ist entzündlich.   Wofür ist SUPERCAST dein ideales Resin? Was hast du als Nächstes damit vor?